Products
4636 από 4636 products
Thin Spindle Internal Hole Micrometer (4mm)
Accuracy: (6+L/50)μm L=maximum measuring length (mm) Optional accessory: setting ring (code 6312).
Internal Hole Micrometer with Bars
Accuracy: (3+n+L/50)μm n=number of rods, L=maximum measuring length(mm) Supplied with setting standards Carbide measuring faces.
Internal Hole Micrometer with Bars for Large Cylinders
Accuracy: (7+n+L/50)μm n=number of rods, L=maximum measuring length(mm) Travel of micrometer head 50mm Carbide measuring faces
Bar Hole Internal Micrometer
Micrometers up to 500mm according to DIN863-4 Reading 0.01mm Carbide anvils Optional accessories: gage block accessory (code 6881), cylinder gage...
View full details
Digital Internal Hole Micrometer with Bars for Large Cylinders
Micrometer head: 150-175mm Carbide measuring faces for micrometer head and extension rods Points of extension rods are spring loaded Data output B...
View full details
Inch Micrometer
Carbide measuring faces Graduation 0.0001" Ratchet stop type Supplied with setting standards (except 0-1").
Can Micrometer
The can micrometer is a specialized measuring tool used to measure the dimensions of can seams, especially those found on metal containers or cans....
View full details
Micrometer with Counter 0.01mm
Counter resolution: 0.01mm Thimble graduation: 0.01mm Carbide measuring faces Meet DIN 863-1 Ratchet stop Supplied with setting standards (except ...
View full details
Micrometer with Bars 0.01 mm
Adjust collars for different measuring ranges Ratchet stop Carbide measuring faces Supplied with setting standards.
Micrometer with Discs
Measure root tangent length of gear Ratchet stop Supplied with setting standards.
Micrometer with interchangeable probes
Non-rotating spindle Ratchet stop Supplied with 7 pairs of anvil/spindle tip Setting standards are included (except 0-25mm) Optional accessory: 55...
View full details
Micrometer with interchangeable anvil
Measure tube thickness, shoulder edge distance, rivet head height, etc Supplied with flat anvil and rod anvil Ratchet stop Carbide spindle tip Set...
View full details
Micrometer with conical tips
Measure the web thickness of drills, small grooves and keyways Ratchet stop Carbide tips Supplied with setting standards (except 0-25mm).
Micrometer with large anvil
Resolution 0.001mm Ratchet stop Supplied with setting standards (except 0-25mm)
Micrometer with Non-Rotating Discs
Measure root tangent length of gear Non-rotating spindle Ratchet stop Supplied with setting standards.
Micrometer with flat ends
Non-rotating spindle Ratchet stop Optional accessory: 55° setting standards (code 3281-SP), measuring tips (code 7381).
Micrometer with 2 x 5 mm anvils
Measure splined shafts, slots and keyways Ratchet stop Carbide measuring faces Supplied with setting standards (except 0-25mm).
Micrometer with Pin for Pipe Wall (Tube)
Measure wall thickness of tubes Ratchet stop Carbide spindle tip Supplied with setting standards (except 0-25mm).
Quality Control Micrometer
Technical Specifications Measuring range: 0–25 mm, 25–50 mm or 0–1", 1–2" Measuring surface: carbide or ceramic Reading: 0.01 mm / 0.0001" ...
View full details
Digital & Analog Micrometer 0.0002 mm
Absolute encoder, the original data remains after power off Adjustable resolution: 0.002mm/0.00001" 0.001mm/0.00005" 0.01mm/0.0005" O...
View full details
Digital & Analog Micrometer 0.001mm
Resolution 0.001mm IP54 dust/waterproof Button function: on/off, set, ABS/INC No data output LR44 battery, automatic power off Carbide measuring f...
View full details
Digital Micrometer - 3 Contacts
Optional accessory: digital indicators (code 2103-10F, resolution 0.001mm/0.00005") or dial indicators (graduation 0.001mm), setting rings (code 6...
View full details
Digital Micrometer - 3 Contacts
Optional accessory: digital indicators (code 2103-10F, resolution 0.001mm/0.00005") or dial indicators (graduation 0.001mm), setting rings (code 63...
View full details
Digital Micrometer - 3 contacts - Waterproof IP54 - 0.001mm
Specifications Type: Digital internal micrometer, 2-point / 3-point (two points/three points) Resolution: 0.001mm (for models 3127-275 and 312...
View full details
Digital Micrometer - 3 Contacts - Wide Range - Waterproof IP54
Digital Micrometer 0.001 mm
Digital Micrometer 0.001mm
Digital Micrometer 1 & 2 Balls 0.001 mm
Digital Micrometer Blade
Digital Micrometer Crimp
Digital Micrometer IP65 10mm/turn
Digital Micrometer V-ANVIL
Digital Waterproof Micrometer IP65 0.001 mm
Digital Waterproof Micrometer IP65 0.001 mm (rapid movement)
Digital Waterproof Micrometer IP65 0.001mm
Digital Micrometer for Thread Pitch Diameter
Digital Micrometer for Gears IP65
Digital micrometer for disc brakes digital
Digital Double-Ended Micrometer (2 screens) 0.001mm
Digital Disk Micrometer for Sheets & Profiles
Digital Micrometer with Bars 0.001 mm
Digital Micrometer with Interchangeable Probes
Digital Micrometer with Interchangeable Anvil
Digital Micrometer with Vertical Display IP65
Digital Micrometer with Tapered Pins
Digital Micrometer with Large Anvil
Digital Micrometer with Non-Rotating Discs
Digital Micrometer with Flat Ends
Digital Micrometer with Carbide Tips
Digital Micrometer with Pin for Pipe Wall (Tube) & Software 0.001mm
Digital 3D Microscope
Microscope with TFT screen
Microphone for the sound level meter PCE-SLD 10
Milliohmmeter
Mini Deburring Handle with Ceramic Blade NOGA
Mini Carbide Boring Bars 90°
Mini Carbide Inserts for Boring and Profiling
Mini Carbide Boring Bars with Chip Breaker
Mini Carbide Chamfering Tools
Mini Carbide Mandrels for O rings
Mini Carbide Grooving Tools for O-ring (round grooving)
Mini Carbide Inserts for Profiling
Mini Carbide Grooving Tools for Retaining Rings and Internal Grooves
Mini Carbide Grooving Tools for Face Grooving
Mini Carbide Grooving Tools for Internal Grooves
Mini Carbide Grooving Tools for External Face Grooves
Mini Carbide Grooving Tools for Internal Face Grooves
Mini Carbide Threading Inserts
Mini Carbide Threading Inserts
Mini Carbide Hole Countersinks
Mini Height Gauge
Mini Straight Nesting Blocks
Protractor - Reading 1°
Digital Protractor - Clinometer 0-225° - Reading 0.05° - IP54
Protractor 0-180° - Reading 0.05° - Accuracy ±0.3°
Protractor 180° - 1°
Μοιρογνωμόνιο 180° - 1° -
Protractor 180° - Reading 1°
Protractor 180° - Reading 1°
Protractor 180° - Reading 1° - Lightweight Coated Aluminum
Protractor 180° - Angle - Level - Ruler
Protractor 180° - Angle with level - Center angle
Protractor 320° - 1°
Protractor with 4x magnifying lens 90° - Reading 5'
Digital Protractor 0-360° - 0.1°
Digital Protractor 0-360° - Reading 0.05°
Coating Hardness Measuring Pencil
Wind speed control unit with alarm (for cranes)
Strong Permanent Magnets with Female Thread
Threaded magnetic disc 279900 M3
Permanent Magnets with Female Thread
Permanent Magnets with Adjustable Angle Between Them
Power Table Feed Motor 110V
Battery CR2025 Voltage 3V
Battery CR2032 Voltage 3V
Battery SR44 Voltage 1.55 V
Battery Voltage 1.5V
Micrometer Ball for Tube Measurement
Aluminum hardness calibration block HDT-B-HW16 15-17
Strap Bolts
Blade Tips for Scriber Clock
Tips for dynamometers - Tensile
Tips for torque wrenches - Compression
Tips for torque wrenches - Compression
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator
Tips for Dial Indicator Carbide
Tips for Dial Indicator Carbide
Tips for Dial Indicator Carbide
Tips for Dial Indicator Carbide
Tips for Dial Indicator Carbide
Tips for Dial Indicator Carbide
Tips for Dial Indicator Carbide
Tips for Dial Indicator Carbide
Tips for Dial Indicator Carbide
Tips for Dial Indicator Carbide
Tips for Dial Indicator Carbide
Tips for Dial Indicator Carbide
Tips for Dial Indicator Carbide
Tips for Dial Indicator Carbide
Tips for Dial Indicator Carbide
Tips for Dial Indicator Carbide
Tips for Dial Indicator Carbide
Tips for Dial Indicator Carbide
Tips for Dial Indicator Carbide
Tips for Dial Indicator Carbide
Tips for Dial Indicator Carbide
Tips for Dial Indicator Carbide
Tips for Dial Indicator Carbide
Tips for Dial Indicator Carbide
Tips for Dial Indicator Carbide
Tips for Dial Indicator Carbide - Ceramic
Tips for Dial Indicator Carbide - Ceramic
Tips for Dial Indicator Ruby
Tips for Dial Indicator Ruby - Sapphire
Tips for Dial Indicator Ruby - Sapphire
Tips for Dial Indicator Ruby - Sapphire - Ceramic - Plastic
Carbide Tips for Dial Indicator
Tip with Roller for Dial Indicator
Ντεσιμπελόμετρο για επιτοίχια τοποθέτηση
Wooden box for collet and taper
Wooden Box for Gauge Pins
Brush Guides
Guides for Heavy Duty D-HCB Hole Saws
Guides for MHS Hole Saws
Wheel guides
Internal Keyway Broach Cutter Guide
Measuring guide for MultiCheck system
15 mm ball gauge
Display for Anemometer
Display for Crane Scale
Display for digital calipers
Display screen for 7107
pH Meter Display
Hole Gauge 0.01mm from 0 to 5 mm
Steel Goniometer Set 0.45-3 mm - Zigler Meter
Cylindrical Hole Gauge 0.1 mm
Tapered Opometer
Taper Opometer
Ophthalmometer Taper 0.8-15 mm Scale 150 mm
Ophthalmometer Taper 1-29 mm
Optical Parallels
Optical Center Finder
Tapered shaft testing instrument for paints and varnishes
Horizontal Base for 500N Dynamometer, Tension Only
Horizontal Motorized Dynamometer Base 500 N
Coupling Nuts for Clamps
Collet Clamping Nuts
Parallel Pads
Parallel Pads
Parallel Pads
Parallel Blocks - 18 pairs - 150x8 mm
Parallel Blocks - 4 pairs - 150x13 mm
Parallel Blocks - 7 pairs - 150x6.8 mm
Parallel Blocks - 9 pairs - 150x8.5 mm
Parallel Pads - Thickness Measurement - 8 pairs 100 mm
Parallel Blocks - Thickness Measurement 6 pairs - 200mm
Parallel Thin Shims 10 pairs - 150x3mm - 0.005mm
Parallel Pads 14 pairs - 150x10 mm
Parallel Pads 4 pairs - 150x5mm - 0.01mm
Parallel Pads 6 pairs - 150x4.6mm - 0.01mm
Parallel Pads 9 pairs thin - 150x6mm - 0.01mm
Parallel Plate Pairs - Length 100mm
Parallel Pads Pairs - Length 125mm
Parallel Pair Blocks - Length 160mm
Parallel Blocks Pairs - Length 200mm
Parallel Wavy Pads
Parallel Thickness Gauge Blocks - 8 pairs - 150 mm
Adjustable Parallel Blocks
Strapping Accessories Nuts
Accessory pads for the VSJ-70A Clamping System
Accessory for Dial Indicator
Accessory for Dial Test Indicator Ø8, rotatable +/- 40°
Contact Paste - Bearings
Contact Paste - Bearings
Cutting Paste 100 ml
Cutting Paste 500 ml
Sheets - Roll Strips 2500 x 150 mm Stainless Steel
Sheets - Roll Strip 2500 x 150 mm Steel
Sheets - Roll Strip 2500 x 150 mm Brass - Antimagnetic
Sheets - Steel Plates
Sheets - Stainless Steel Sheets
Welding Thickness Gauge
Welding Thickness Gauge
Welding Thickness Gauge
Welding Thickness Gauge
Welding Thickness Gauge
Welding Thickness Gauge
Welding Thickness Gauge
Welding Thickness Gauge
Welding Thickness Gauge
Welding Thickness Gauge
Welding Thickness Gauge
Welding Thickness Gauge
Welding Thickness Gauge
Welding Thickness Gauge
Welding Thickness Gauge
Welding Thickness Gauge
Welding Thickness Gauge - Hi-Lo
Wall Thickness Gauge
Tree Trunk Calipers
Liquid Film Coating Thickness Gauges
Εμφανίζονται 3000 από 4636 προϊόντα