PCE-ADL 11 - Anemometer with data logging function
| Κωδικός | Εύρος | Ανάγνωση | Ακρίβεια | Τιμή | Στοκ | ||
|---|---|---|---|---|---|---|---|
| PCE-ADL 11 | 1.2-30 m/s | 0.01 m/s | 3% | €248,00 | Με παραγγελία | ||
| Measurement range |
1.2 ... 30.0 m / sec. 4.3 ... 108.0 km / h 2.33 ... 58.32 knots 2.69 ... 67.2 mph 236 ... 5906 ft / min |
| Analysis |
0.01 m/s 0.1 km/h 0.1 knots 0.1 mph 1 ft/min |
| Measurement accuracy |
m / s: ± (3% + 0.20 m / s) km/h: ± (3% + 1.0 km/h) Knots: ± (3% + 0.4 knots) mph: ± ( 3% + 0.4 mph) ft/min: ± (3% + 40 ft/m) |
| Save | Up to 60000 readings |
| Data interface | USB for data transmission |
| PC software | For data evaluation with graphical representation |
| Eligible registration intervals | 3 seconds, 5 seconds, 10 seconds, 30 seconds, 1 minute, 5 minutes, 10 minutes, 30 minutes , 1 hour, 2 hours, 3 hours, 6 hours, 12 hours |
| Operating status | Indicated by red, yellow and green LEDs |
| Audible alert when limits are exceeded | Yes |
| Methods of measurement | Automatic and manual start of measurement |
| Sensor | Anemometer |
| Power supply | Lithium thionyl chloride battery, 3.6V Mignon |
| Low battery sound alert | Yes |
| Operating conditions | 0 ... 50°C / 32 ... 122°F, <80% relative humidity |
| Maximum height above sea level | 2000 m / 6561 ft |
| Weight | 49g / < 1lb |
| Dimensions | 145 x 35 x 30 mm / 5.7 x 1.4 x 1.2 inches |
The PCE-ADL 11 anemometer is a wind speed data recorder. Configuration on the wind meter is done via the supplied software and provides multiple measurement settings. The anemometer measures various parameters. These include m/sec, km/h, knots, mph and feet/minute. In addition to the measurement parameters, the measurement intervals can be set in the software by the wind measuring device. The data logging function accommodates 60,000 measured values. After completing the series of measurements, the data from the anemometer can be read into the computer via the software. The measurement results are displayed either graphically as a curve or in table format.
The impeller installed in the anemometer already responds to low flow velocities. In this case, the anemometer can be fixed by means of a fixing device. There is a threaded hole on the bottom of the wind gauge so you can mount the unit firmly to the mounting bracket.
- Threaded hole in the device
- Configuration via software
- Easy to use
- Instant reaction impeller, smooth operation
- Choice of different units of measurement
- Evaluation on the computer (graphical representation)
- Audible notification when the limit value is exceeded - Measurement memory of up to 60,000 values
Package contents
1 x PCE-ADL 11 Anemometer
1 x Mounting device
1 x Software
1 x Impeller
1 x 3.6V lithium thionyl chloride battery
1 x User Manual
