Workpiece Materials
- (S) - Heat Resistant Superalloys (Fe,Ni,Co) - Titanium Alloys (HRSA, Titanium alloys)
Chipbreaker
- (SF) - Geometry specially designed for finishing machining of superalloys and titanium alloys. Features a large rake angle (rake angle) with a short length and is available with small cutting radii (RE). Suitable for small cutting depths (Ap) and low feeds (Fn). Ensures excellent surface quality.
Grade
- YG401 – For superalloys (HRSA) (S10–S20). Durable PVD TiAlSiN coating for excellent protection and lubrication.
Feed
- Fn = 0.03~0.20 mm/rev
Cutting Speed
- (S31-37) - Vc=30~90 m/min
Turning inserts from YG1, a leading cutting tool manufacturer from Korea. The choice of the appropriate insert depends on the chipbreaker, i.e., the geometry that helps in breaking and removing the chip, as well as the grade, which describes the microstructure and coating of the insert and directly affects hardness and fracture toughness. The cutting conditions (speed, feed, depth) must be carefully defined to achieve maximum tool performance and life.
| Code | Cutting Depthmm | Radiusmm | Grade | Availability | Price excl. VAT | Price incl. VAT | Cart |
|---|---|---|---|---|---|---|---|
| DCGT070201-SF-YG401 | 0.10~1.5 | 0.1 | YG401 |
€7,20
|
€8,93
|
||
| DCGT070202-SF-YG401 | 0.10~1.5 | 0.2 | YG401 |
€7,20
|
€8,93
|
||
| DCGT070204-SF-YG401 | 0.10~1.5 | 0.4 | YG401 |
€7,20
|
€8,93
|
Lathe Handle for 55° Rhombus Insert DC-- (Finishing)
External Lathe Tool Holder SDNCN by ECHAIN, suitable for rhombus-type inserts DC**07 and DC**11. With an approach angle of 62.5° The tool holders d...
View full details
Internal Lathe Toolholders (Boring Bars) - Rhombic DC--
Internal Lathe Boring Bar SDUCR from ECHAIN, suitable for DC--07 or DC--11 type inserts. With 93° approach angle. Features a hole for coolant suppl...
View full details
Internal Lathe Toolholders (Boring Bars) - Rhombus DC--
Internal Lathe Turning Toolholder SDQCR by ECHAIN, suitable for type DC--07 or DC--11 inserts. With 107.5° approach angle. The toolholders do not ...
View full details
Lathe Toolholder for 55° Rhombus Insert DC-- (Finishing)
External Lathe Turning Toolholder SDJCR/L by ECHAIN, suitable for rhombus (diamond) type DC**07 and DC**11 inserts. With approach angle 93° The too...
View full detailsInserts DC--07
You're viewing one product from this category. Browse the full range.
