DL Probe for Hardness Tester HDT-LP200 (Narrow grooves or small holes)
- Impact Devices:
- DC (HDT-LP200-DC)
- C (HDT-LP200-C)
- D+15 (HDT-LP200-D15)
- DL (HDT-LP200-DL)
- E (HDT-LP200-E)
- G (HDT-LP200-G)
- Hardness Blocks:
- D (ISH-BHLD) - For all impact devices.
- G (ISH-BHLG) - Only for impact device G (ISH-LP200-G).
- Printer: ISH-LP200-PRINTER
- Support Rings: (See details)
Application Depending on Impact Device:
- DC: Inner walls of small spaces
- C: Small or thin workpieces, coating
- D: General use
- D+15: Deep grooves
- DL: Narrow grooves or small holes
- E: Hard materials
- G: Casting or forging
Technical Specifications:
- Maximum Surface Roughness (Ra):
- DC: 2μm
- C: 0.4μm
- D: 2μm
- D+15: 2μm
- DL: 2μm
- E: 2μm
- G: 7μm
- Minimum Workpiece Weight:
- Direct Measurement:
- DC: 1.5kg
- C: 1.5kg
- D: 5kg
- D+15: 2kg
- DL: 1kg
- E: 5kg
- G: 15kg
- On Solid Support:
- DC: 0.05kg
- C: 0.5kg
- D: 2kg
- D+15: 0.1kg
- DL: 0.05kg
- E: 0.05kg
- G: 5kg
- Coupled on Plate:
- DC: 0.05kg
- C: 0.5kg
- D: 0.05kg
- D+15: 0.05kg
- DL: 0.05kg
- E: 0.05kg
- G: 1.5kg
- Direct Measurement:
- Minimum Workpiece Thickness:
- DC: 3mm
- C: 1mm
- D: 3mm
- D+15: 3mm
- DL: 3mm
- E: 3mm
- G: 10mm
