Portable Leeb Rebound Hardness Tester
PCE-2000N
| Measurement range |
170 ... 960 HLD 17.9 ... 69.5 HRC 19 ... 683 HB 80 ... 1042 HV 30.6 ... 102.6 HS 59.1 ... 88 HRA 13.5. .. 101.7 HRB |
|
Impact detector (optional impact devices) |
D (DC, D + 15, C, G, DL) |
| Probe cable length | Approximately 1.5 m / 4.9 ft |
| Accuracy | ± 0.5% (with 800 HLD) |
| Repeatability | 0.8% (with 800 HLD) |
| Units |
HL (Leeb) HV (Vickers) HB (Brinell) HS (Shore) HRA (Rockwell A) HRB (Rockwell B) HRC (Rockwell C) |
| Measurable materials |
Steel Stainless steel Aluminum alloy |
| Display | OLED 128 x 64 pixel |
| Memory | 600 averages in 6 data groups |
| Data output | USB stick |
| Power supply | 3 x AA 1.5V batteries |
| Automatic power off | after 12 minutes of inactivity |
| Operating conditions | 10 ... 50°C / 50 ... 122°F, 20 ... 90% rh |
| Storage conditions | -30 ... 60°C / -22 ... 140 °F |
| Dimensions | 160 x 80 x 40 mm / 6.3 x 3.1 x 1.6 in (H x W x D) |
| Weight |
Measuring device with batteries: approximately 300 g< 1 lb Device impact : approximately 75 g < 1 lb |
| Material | |
| Steel / cold rolled steel |
HRA 59.1 ... 85.8 HRC 20 ... 68.5 HRB 38.4 ... 99.6 HB 127 ... 651 HSD 32.2 ... 99.5 HV 83 ... 976 |
| Alloyed tool steel |
HRC 20.4 ... 67.1 HV 80 ... 898 |
| Stainless steel |
HRB 46.5 ... 101.7 HB 85 ... 655 HV 85 ... 802 |
| Cast iron | HB 93 ... 334 |
| Tough iron | HB 131 ... 387 |
| Cast aluminum |
HRB 23.8 ... 84.6 HB 19 ... 164 |
| Brass |
HRB 13.5 ... 95.3 HB 40 ... 173 |
| Bronze | HB 60 ... 290 |
| Copper | HB 45 ... 315 |
Rebound hardness tester PCE-2000N
Hardness meter for metallic materials / Different impact probes / 7 different hardness units / Data storage on USB stick
Hardness meter for metallic materials / Different impact probes / 7 different hardness units / Data storage on USB stick
The metal hardness tester PCE-Instruments PCE-2000N uses the Leeb method. This is a dynamic hardness testing method in which a hard metal ball strikes a test surface with a defined impact energy. The impact of the hard metal ball on the test surface results in plastic deformation of the surface at the point of impact. From this deformation, energy loss occurs, which is proportional to the hardness of the sample and can be determined from the ratio of the rebound velocity to the impact velocity of the sample.
The hardness meter from PCE Instruments can be used to measure six different hardness scales (HL, HV, HRA, HRC, HB, HV, HS) as well as ten different materials.
The hardness tester is delivered with impact device D, however optionally other impact devices (DC, DL, C, D + 15, E, G) can be connected for more specific applications. Additionally, data can be stored directly on a USB stick, which further extends the flexibility of this portable hardness tester. With an extremely easy-to-read OLED display, ergonomic design, and a user-friendly menu, operating the instrument is extremely easy.
- Measures all common hardness parameters
- External impact probe on 1.5 m / 4.9 ft cable
- Large measuring range
- High accuracy
- Data measurements, storage on USB stick
- Various other impact devices (optional)
- Ability to measure at different angles
- Color display
Package contents
1 x Leeb rebound hardness tester PCE-2000N
1 x Hardness reference block
1 x Type D probe
1 x Carrying case
1 x Cleaning Brush
1 x User manual
3 x AA 1.5 V batteries
2 x Stabilizing ring
1 x 2 GB USB stick
1 x Hardness reference block
1 x Type D probe
1 x Carrying case
1 x Cleaning Brush
1 x User manual
3 x AA 1.5 V batteries
2 x Stabilizing ring
1 x 2 GB USB stick
