CODEPCE-ADL 11
CODEPCE-ADL 11
Anemometer - Data Logger
Availability & price
| Code | Range | Reading | Accuracy | Availability | excl. VAT | incl. VAT | Certificate | Cart |
|---|---|---|---|---|---|---|---|---|
| PCE-ADL 11 | 1.2-30 m/s | 0.01 m/s | 3 |
€247,00
|
€306,28
|
| Measurement range |
1.2 ... 30.0 m / sec. 4.3 ... 108.0 km / h 2.33 ... 58.32 knots 2.69 ... 67.2 mph 236 ... 5906 ft / min |
| Reading |
0.01 m/s 0.1 km/h 0.1 knot 0.1 mph 1 ft/min |
| Measurement accuracy |
m / s: ± (3% + 0.20 m / s) km / h: ± (3% + 1.0 km / h) Knots: ± (3% + 0.4 knots) miles / hour: ± (3% + 0.4 miles / h) ft / min: ± (3% + 40 ft / m) |
| Storage | Up to 60000 readings |
| Output | USB for data transmission |
| PC Software | For data evaluation with graphical representation |
| Selectable recording intervals | 3 seconds, 5 seconds, 10 seconds, 30 seconds, 1 minute, 5 minutes, 10 minutes, 30 minutes , 1 hour, 2 hours, 3 hours, 6 hours, 12 hours |
| Operating status | Indicated by red, yellow, and green LEDs |
| Limit exceedance alarm | Yes |
| Measurement modes | Automatic and manual start of measurement |
| Sensor | Anemometer |
| Power supply | Lithium thionyl chloride battery, 3.6V Mignon |
| Low battery acoustic warning | Yes |
| Operating conditions | 0 ... 50°C / 32 ... 122°F, <80% relative humidity |
| Maximum height above sea level | 2000 m / 6561 feet |
| Weight | 49 g / < 1 pound |
| Dimensions | 145 x 35 x 30 mm / 5.7 x 1.4 x 1.2 inches |
The PCE-ADL 11 anemometer is a data logging instrument for wind speeds. The settings on the wind measuring device are made via the supplied software which provides multiple measurement settings. The wind meter measures various parameters. These include m/sec, km/h, knots, mph, and feet/min. In addition to the measurement parameters, the measurement intervals can be set in the software from the wind measuring device. The data logging function accommodates 60,000 measured values. After completing the series of measurements, the data from the anemometer can be read on the computer via the software. The measurement results are displayed either graphically as a curve or in table form.
The impeller installed in the anemometer already responds to low flow speeds. In this case, the wind meter can be mounted via a mounting device. There is a threaded hole at the bottom of the wind meter so you can securely attach the unit to the mounting bracket.
- Threaded hole on the device
- Configuration via software
- Easy to use
- Instant response impeller, smooth operation
- Selection of various measurement units
- Evaluation on the computer (graphical representation)
- Acoustic alert when exceeding the limit value - Measurement memory up to 60,000 values
Package contents
1 x PCE-ADL 11 Anemometer
1 x Mounting device
1 x Software
1 x Impeller
1 x 3.6V lithium thionyl chloride battery
1 x User manual
Official distributor
PCE Instruments
Anemometers
You're viewing one product from this category. Browse the full range.
