Resistance Meter
PCE-IT100
| Measuring range | |
| AC Voltage (40 ... 400 Hz) | 750V |
| Reading | 1V |
| Accuracy | ± 0.8% ± 3 dgt |
| DC Voltage | 1000V |
| Reading | 1V |
| Accuracy | ± 1.2% ± 10 dgt |
| Resistance | 40 Ω / 400 Ω |
| Reading | 0.01 Ω / 0.1 Ω |
| Accuracy | ± 1.2% ± 3 dgt |
| Insulation resistance | 4 MΩ / 40 MΩ / 400 MΩ / 4000 MΩ |
| Reading | 0.001 MΩ / 0.01 MΩ / 0.1 MΩ / 1 MΩ |
| Insulation resistance | |
| 125V |
± (2% + 10 dgt) / ± (2% + 10 dgt) / ± (4% + 5 dgt) / ± (5% + 5 dgt) |
| 250V |
± (2% + 10 dgt) / ± (2% + 10 dgt) / ± (3% + 5 dgt) / ± (4% + 5 dgt) |
| 500V |
± (2% + 10 dgt) / ± (2% + 10 dgt) / ± (4% + 5 dgt) / ± (4% + 5 dgt) |
| 1000V |
± (3% + 10 dgt) / ± (2% + 10 dgt) / ± (2% + 5 dgt) / ± (4% + 5 dgt) |
| Continuity test | Audible signal: ≤ 35 Ω, test current ≤ 200-mA |
| Power | Battery 6 x 1.5 V AA |
| Environmental conditions |
0 ... 40°C / 32 ... 104°F, <80% RH (operation) -10 ... 60°C / 14 ... 140°F, <70% RH (bearings) |
| Dimensions | 200 x 92 x 50 mm / 7.9 x 3.6 x 2 in |
| Weight | 700 g / 1.5 lb (with battery) |
| Standards | IEC10101, CAT III 1000V |
Insulation tester PCE-IT100
For insulation resistance up to 4000 MΩ / CAT III 1000V / Easy handling / Simple or continuous measurement / Maximum and minimum value function
For insulation resistance up to 4000 MΩ / CAT III 1000V / Easy handling / Simple or continuous measurement / Maximum and minimum value function
The PCE-IT100 insulation tester detects insulation resistances up to 4000 MΩ with auxiliary voltages of 125V, 250V, 500V, and 1000V. Additionally, it is used to measure resistances up to 400 Ω and alternating and direct voltage. A continuity tester with an audible signal is also part of the insulation tester's equipment. The tester features a data hold function as well as a function to record the maximum and minimum values.
The large digits, backlit display, and ease of use make the PCE-IT 100 ideal for demanding environments with limited lighting. The insulation tester comes with a set of test leads with test probes, a test lead with crocodile clip, and 6 batteries.
Compliance limits for insulation measurement
- For new installations (dry rooms): 1000 ohms x operating voltage (e.g. at 230 volts> 230 kOhms)
- For new installations (wet areas, outdoors): 500 ohms x operating voltage
- Grounding in devices: 1000 ohms x operating voltage
- Protected devices: 2 MOhm
- Electrical tools: 2 MOhm
- Extremely low voltage: 250 kOhm
- Electrical appliances: 5 MOhm
- Common test voltage values are 100 V for low voltage and telecommunications systems, 500 V for building installations and household appliances, 1000 V for motors and low voltage transformers
- Large measuring range
- 4 different test voltages up to 1kV
- Automatic power
- Automatic power
- Auto power off function
- Safety: EN 61010-1, CAT III 1000V
- Backlit display
- Includes carrying case
- Simple measurement and continuous measurement
- Safety: EN 61010-1, CAT III 1000V
- Backlit display
- Includes carrying case
- Simple measurement and continuous measurement
Package contents
1 x PCE-IT100 insulation tester1 x Test lead set
1 x Crocodile clip on 1 m / 3.3 ft cable
6 x 1.5V AA battery
1 x Transport belt
1 x User manual
1 x Carrying case
