PCE-WSAC 50W 24 - Anemometer for Cranes 24V
| Κωδικός | Εύρος | Ανάγνωση | Ακρίβεια | Τιμή | Στοκ | ||
|---|---|---|---|---|---|---|---|
| PCE-WSAC 50W 24 | 4- 180 km/h | 8 km/h | 3% | €1.364,00 | Με παραγγελία | ||
Τιμές χωρίς ΦΠΑ 24%
| Unit PCE-WSAC 50W 24 | |
| Entrance | Pulse, analog (4 ... 20-mA) or radio |
| Frequency | IEEE 802.15.4 ISM 2.4GHz |
| Units of measurement | km/h, mph, m/s |
| Power supply for sensors | +15V DC |
| Analog output | 4 ... 20-mA |
| Maximum input impedance | 500 Ω |
| Analyzing the analog output | 10 bits |
| Accuracy of analog output | ± 1.5% |
| Alarm relay | Maximum 250V AC, 8A |
| Display | 128 x 64 pixel LCD display with backlight |
| Case | Sturdy plastic housing |
| Protection class | IP65 (Waterproof) |
| Dimensions | 145 x 95 x 125 mm / 5.7 x 3.7 x 4.9 in |
| Weight | 650g / 1.4lbs |
| Sensor anemometer PCE-WSAC 50W | |
| Measurement range | 4 ... 180 km / h |
| Minimum startup speed | 8 km/h |
| Accuracy | ± 1 km / h in the range 4 ... 15 km / h |
| ± 3% in the range 16 ... 180 km / h | |
| Power supply | Battery cell D 1.5V DC |
| Energy consumption | About 0.3 W with 1.5 V DC power supply |
| Material | PA + FG |
| Ball bearing | Stainless steel X65Cr13 |
| Base | AISI 304 stainless steel |
| Weight (with normal mount) | About 680g / 1.5lbs |
| Weight with self-leveling arm | About 900 g / 2 lbs |
| Dimensions | 320 x 110 x 100 mm / 12.6 x 4.3 x 3.9 inches |
| Storage temperature | -35 ... 70°C / -31 ... 158°F |
| Ambient temperature | -20 ... 70°C / -4 ... 158°F |
| Protection | IP65 (Waterproof) |
Anemometer PCE-WSAC 50W 24
Radio wind warning system / Wind monitoring on construction cranes / 4 ... 20 mA Analog Output / Power supply 110 ... 230 V AC or +24 V DC
Radio wind warning system / Wind monitoring on construction cranes / 4 ... 20 mA Analog Output / Power supply 110 ... 230 V AC or +24 V DC
The PCE-WSAC 50W anemometer is mainly used to measure and monitor the wind load on cranes or wind turbines. In addition, the wind condition can be measured and analyzed before a wind turbine is put into operation. The anemometer PCE-WSAC 50W is equipped with an alarm relay for pre-alarm or main alarm.
Due to its high measuring range of up to 50 m/s anemometer , stormy gusts can also be observed. Its radio range anemometer it is in the open field up to 750 m / 2500 ft in the free 2.4 GHz frequency band. When installing the PCE-WSAC 50W wind alarm display in buildings, a range of up to 60 m / 200 ft for the wind sensor can be achieved. Due to the integrated 4 ... 20 mA analog output of the wind alarm display, the measurement data can also be transferred to other units for evaluation.
- Sturdy plastic casing
- Units: km/h, mph, m/s
- 4 ... 20 mA analog output
- 128 x 64 pixel LC display
- Alarm relay
- Measuring range up to 180 km / h
- Durable stainless steel ball bearings
- Ambient temperature -20 ... 70°C / -4 ... 158°F
- Radio broadcasting
Package contents
1 x PCE-WSAC 50W 24 unit
1 x Wind Sensor
1 x Self-levelling additional arm
1 x Radio Antenna
1 x Monocell D 1.5V DC Battery
1 x User Manual
1 x Wind Sensor
1 x Self-levelling additional arm
1 x Radio Antenna
1 x Monocell D 1.5V DC Battery
1 x User Manual
