PCE-CT 26FN - Paint-Coating Thickness Gauge - Ferrous and NonFerrous
| Measurement range | 0 ... 1250 µm (0 ... 49.2 mils) |
| Reading | 1 µm (0.039 mils) |
| Accuracy | ± (2 µm + 3%L) or ± (0.079 mils + 3%L), where L is the measured thickness |
| Minimum measurement area | 5 x 5mm / 0.2in x 0.2in |
| Minimum radius of curvature | Convex 3 mm (0.1 in) / hollow: 50 mm (2 in) |
| Minimum material thickness | Fe: at least 0.5 mm / 0.02 in |
| NFe: at least 0.3 mm / 0.01 in | |
| Screen | OLED |
| Ambient temperature | 0 ... 50°C / 32 ... 120°F |
| Power supply | 2 x AAA 1.5V battery |
| Dimension | 100 x 52 x 29mm / 4 x 2 x 1.1in |
| Weight | Approx. 68g / < 1lb (without batteries) |
Coating Thickness Gauge PCE-CT 26FN /
For ferrous and non-ferrous substrates / Large measuring surface / Rotating color display / Lightweight
For ferrous and non-ferrous substrates / Large measuring surface / Rotating color display / Lightweight
The PCE-CT 26FN is a coating thickness gauge that performs a non-destructive measurement to check the quality of the coating on ferrous and non-ferrous surfaces and ensures fast, highly accurate measurements.
The PCE-CT 26FN automotive tester is designed for measurements on non-magnetic coatings such as lacquer, plastic, chrome, copper, zinc, enamel, etc. on steel and iron, as well as on all insulating coatings such as lacquer, plastic, enamel, paper, glass, rubber, etc. in copper, aluminium, brass, stainless steel and aluminium.
You can easily measure varnish and paint layers, plastic layers, chrome layers, copper plating, zinc layers, galvanization, enamel on steel, stainless steel, iron and similar materials, non-ferrous metals (copper, aluminum, brass) and anodized aluminum. In addition, the user can easily calibrate the caliper with the help of the calibration standards included in the package.
- Instantly ready to measure
- Sensor resistant to wear
- V-groove for measuring in pipes
- One-handed operation
- Optional ISO calibration
- Included. Carrying Case
Package contents
1 x Coating Thickness Gauge PCE-CT 26FN
2 x AAA 1.5V batteries
1 x Calibration membrane set (5 pieces)
1 x Fe standard block
1 x NFe standard block
1 x Carrying case
1 x User Manual
2 x AAA 1.5V batteries
1 x Calibration membrane set (5 pieces)
1 x Fe standard block
1 x NFe standard block
1 x Carrying case
1 x User Manual
