Skip to content
2102231624 - Δωρεάν μεταφορικά άνω 80€ (με ΦΠΑ) - Τιμές χωρίς ΦΠΑ
2102231624 - Δωρεάν μεταφορικά άνω 80€ (με ΦΠΑ)
Taps
Σετ κολαούζα χειρός Baer HSSG BSW Whitworth TH-BSW, 3 τεμ. ασημί με αυλακώσεις κοπής και τετράγωνο άκρο
Τεχνικά χαρακτηριστικά TH-BSW - Κολαούζο Χειρός Σετ BSW-Αγγλικού Σπειρώματος Ίντσας (Whitworth)
Σετ κολαούζα χειρός Baer TH-BSW BSW Whitworth, 3 τεμ. ασημί HSSG με τετράγωνο στέλεχος
Σετ κολαούζα χειρός Baer TH-BSW BSW Whitworth, 3 τεμ. HSSG ασημί με τετράγωνο άκρο και αυλακώσεις κοπής
Σετ κολαούζα χειρός Baer HSSG BSW Whitworth TH-BSW, 3 τεμ. ασημί με αυλακώσεις κοπής και τετράγωνο άκρο
Τεχνικά χαρακτηριστικά TH-BSW - Κολαούζο Χειρός Σετ BSW-Αγγλικού Σπειρώματος Ίντσας (Whitworth)
Σετ κολαούζα χειρός Baer TH-BSW BSW Whitworth, 3 τεμ. ασημί HSSG με τετράγωνο στέλεχος
Σετ κολαούζα χειρός Baer TH-BSW BSW Whitworth, 3 τεμ. HSSG ασημί με τετράγωνο άκρο και αυλακώσεις κοπής

Availability & price

28 codes

Code Thread ØD2 (mm)□ (mm) Ød1 (mm) Availability excl. VATincl. VAT Cart
TH-BSW-1/16-60 1/16" x 60 2.5 2.1 1.2 1 in stock
€19,50
€24,18
0
TH-BSW-3/32-48 3/32" x 48 2.8 2.1 1.9 2 in stock
€15,30
€18,97
0
TH-BSW-1/8-40 1/8" x 40 3.5 2.7 2.6 2 in stock
€13,90
€17,24
0
TH-BSW-5/32-32 5/32" x 32 4.5 3.4 3.2 13 in stock
€13,90
€17,24
0
TH-BSW-3/16-24 3/16" x 24 6 4.9 3.8 2 in stock
€13,60
€16,86
0
TH-BSW-7/32-24 7/32" x 24 6 4.9 4.6 2 in stock
€13,60
€16,86
0
TH-BSW-1/4-20 1/4" x 20 6 4.9 5.1 1 in stock
€13,60
€16,86
0
TH-BSW-5/16-18 5/16" x 18 6 4.9 6.5 3 in stock
€15,00
€18,60
0
TH-BSW-3/8-16 3/8" x 16 7 5.5 7.9 6 in stock
€16,70
€20,71
0
TH-BSW-7/16-14 7/16" x 14 8 6.2 9.3 4 in stock
€20,90
€25,92
0
TH-BSW-1/2-12 1/2" x 12 9 7 10.5 3 in stock
€24,80
€30,75
0
TH-BSW-9/16-12 9/16" x 12 11 9 12 6 in stock
€31,40
€38,94
0
TH-BSW-5/8-11 5/8" x 11 12 9 13.5 7 in stock
€34,70
€43,03
0
TH-BSW-3/4-10 3/4" x 10 14 11 16.5 1 in stock
€44,60
€55,30
0
TH-BSW-7/8-9 7/8" x 9 18 14.5 19.5 1 in stock
€58,70
€72,79
0
TH-BSW-1-8 1" x 8 18 14.5 22 1 in stock
€67,00
€83,08
0
TH-BSW-1-1/8-7 1"1/8" x 7 22 18 25 5-8 business days
€100,00
€124,00
0
TH-BSW-1-1/4-7 1"1/4" x 7 22 18 28 5-8 business days
€113,00
€140,12
0
TH-BSW-1-3/8-6 1"3/8" x 6 28 22 30.5 5-8 business days
€146,00
€181,04
0
TH-BSW-1-1/2-6 1"1/2" x 6 32 24 33.5 5-8 business days
€167,00
€207,08
0
TH-BSW-1-5/8-5 1"5/8" x 5 32 24 35.5 5-8 business days
€323,00
€400,52
0
TH-BSW-1-3/4-5 1"3/4" x 5 36 29 39 5-8 business days
€323,00
€400,52
0
TH-BSW-1-7/8-4.1/2 1"7/8" x 4.5 36 29 41.5 5-8 business days
€412,00
€510,88
0
TH-BSW-2-4.1/2 2" x 4.5 40 32 44.5 5-8 business days
€412,00
€510,88
0
TH-BSW-2-1/4-4 2"1/4" x 4 45 35 50 5-8 business days
€946,00
€1.173,04
0
TH-BSW-2-1/2-4 2"1/2" x 4 50 39 56.5 5-8 business days
€1.261,00
€1.563,64
0
TH-BSW-2-3/4-3.1/2 2"3/4" x 3.5 50 39 62 5-8 business days
€3.153,00
€3.909,72
0
TH-BSW-3-3.1/2 3" x 3.5 50 39 68 5-8 business days
€3.881,00
€4.812,44
0

The hand tap set consists of three taps and allows you to cut a finished thread with significantly reduced risk of breakage. The advantage of three-piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with one ring) removes 65 per cent of the thread profile and the intermediate tap (No. 2) (marked with two rings) removes 85 per cent. Pre-cutting and reworking with the intermediate tap (No. 2) bring the thread into shape. In the last step, the finishing tap (No. 3) is used, which has no ring marking. Only this cuts the full and usable thread at the end. The division of labour between the three screw tap makes it easier to cut a straight and clean thread by hand.
Compared to the machine tap, the hand tap has a short shank. This allows you to cut internal thread by hand without jamming and can be operated with tap wrenches, tool ratchets or other holding tools with square drive.
The thread can be cut in a pre-drilled core hole.
Due to the short chamfer of the finish tap, the hand tap set can be used reliably and universally for through holes and blind holes.
As a rule, three-piece hand tap sets are used for regular threads with coarse pitch, as the thread profile area is larger than for fine threads and the force effects on the taps are greater.

Datasheet Technical datasheet

Complementary products

Frequently bought together

Baer

Official distributor

Baer

Η BAER Tools GmbH , με έδρα στο Heddesheim της Γερμανίας, είναι μια οικογενειακή επιχείρηση με περισσότερα από 40 χρόνια εξειδίκευσης στην τεχνολογία κοπής και σπειρώματος· από το 1984 έως σήμερα έχει εδραιωθεί ως α ξιόπιστος προμηθευτής εργαλείων σπειρώματος , όπως κολαούζα (taps), φιλιέρες (dies) και ένθετα σπειρώματος (thread inserts). Η εταιρεία προσφέρει μια ε ντυπωσιακή ποικιλία προϊόντων , από κοπτικά χειρός και κοπτικά μηχανής για κοπή εσωτερικών και εξωτερικών σπειρωμάτων έως εξειδικευμένα συστήματα επισκευής και ενίσχυσης σπειρωμάτων ( BaerCoil ® και BaerFix ®) — προσαρμοσμένα για χρήση σε μεταλλικά και πλαστικά υλικά, ακόμη και σε απαιτητικές εφαρμογές όπως η αεροδιαστημική βιομηχανία .

This product belongs to the collection

Taps

You're viewing one product from this category. Browse the full range.

113 products
View all

Related categories

All categories →
Tap Wrenches7 products Tapping Machines15 products Thread Repair39 products Dies41 products Die Stocks2 products
Tap Wrench

From our Wiki

Tap Wrench

Tap taps are precision cutting tools used to create an internal thread in a hole (e.g. in nuts or holes in metal). This process is called tapping and requires the use of a special tap wrench or machine (drill/CNC).

  • Main Categories:Hand (3-piece set): Consists of the taper (conical), the intermediate and the bottoming tap. They are used sequentially to distribute the cutting load and ensure perpendicularity.Machine: Designed for a single pass. They are divided into Spiral Point (push the chip forward - for through holes) and Spiral Flute (pull the chip out - for blind holes).
  • Materials & Coatings: Usually made from HSS or HSS-E (Cobalt) for higher resistance to heat. They often have a TiN (gold color) coating to reduce friction.
  • Important Rule: Before use, the appropriate hole must be drilled. The general formula for metric threads is:$D_{hole} = D_{nominal} - P$(Where $D$ is the diameter and $P$ is the thread pitch).
Read the guide