The adjustable steel tap wrench is an operating tool made of tool steel for taps, with which internal thread can be cut by hand. An all-steel tap wrench is ideal when a larger diameter of the threaded hole and thus a higher torque is required. The reason for this is that the higher quality of the cast steel also allows higher forces to be absorbed.
The outstanding quality of the tap wrench lies not only in the material, but also in the high-quality clamping jaws, handles and geometry, which make the tool extremely stable and very precise to use. They are standardized according to DIN 1814, equipped with hardened clamping jaws and can be adjusted. The term "Tap turning tool" is also used equivalently in everyday life. These holding tools are not only used for thread cutting, because they are generally used to clamp tools with square ends. For example, screwdrivers, reamers or insertion tools for thread inserts can be clamped. The long levers on both sides support plumb cutting in the bore and easy application of the required torque. Another advantage is the easy handling and the short changing times. In order to be able to work in hard-to-reach places, one lever can be unscrewed on one side.
| Code | For Pilot Pin | Type | Inches | Availability | Price excl. VAT | Cart |
|---|---|---|---|---|---|---|
| TWB-M1-8 | M1-8 | NO. 0 | 1/16-1/4 | 3 in stock |
€7,70
|
|
| TWB-M1-10 | M1-10 | NO. 1 | 1/16-3/8 | G 1/8 | 1 in stock |
€8,80
|
|
| TWB-M1-12 | M1-12 | NO. 1.5 | 1/16-1/2 | G 1/8 | 3 in stock |
€8,80
|
|
| TWB-M4-12 | M4-12 | NO. 2 | 5/32-1/2 | G 1/8 | 6 in stock |
€15,40
|
|
| TWB-M5-20 | M5-20 | NO. 4 | 7/16-1'' | G 1/4-3/4 | 2 in stock |
€28,00
|
|
| TWB-M11-27 | M11-27 | NO. 3 | 7/32-3/4 | G 1/8-1/2 | 1 in stock |
€45,70
|
|
| TWB-M13-32 | M13-32 | NO. 5 | 1/2-1.1/4 | G 1/4-1'' | 4 in stock |
€53,30
|
|
| TWB-M18-42 | M18-42 | NO. 6 | 3/4-1.1/2 | G 1/2-1,1/4 | 1 in stock |
€87,00
|
|
| TWB-M27-52 | M27-52 | NO. 7 | - | 1 in stock |
€96,00
|
|
| TWB-M27-64 | M27-64 | NO. 8 | - | 5-8 business days |
€226,00
|