PCE-DC 41 - Clamp Meter - Multimeter
| Technical specifications |
| DC voltage | |||
| Range | Reading | Accuracy | |
| Input resistance: 1 MΩ | 600V | 0.1V | ± 1 % + 2 digits |
| DC voltage (peak model) | |||
| Input resistance: 1 MΩ |
600V 0.0 ... 0.01 inches |
0.1V 0.0 ... 0.01 inches |
± 1.5 % + 8 digits 0.0 ... 0.01 inches |
| AC voltage | |||
| Input resistance: 1 MΩ | 600V | 0.1V |
± 1.2 % ± 5 digits (50 ... 500 Hz) |
| AC voltage (peak model) | |||
| Input resistance: 1 MΩ | 600V | 0.1V | ± 1.7 % + 10 digits |
| DC | |||
|
60 A 600 A |
0.01 A 0.1 A |
± 2 % + 5 digits | |
| DC (top model) | |||
| 600 A | 0.1 A | ± 2.5 % + 8 digits | |
| AC | |||
|
60 A 600 A |
0.01 A 0.1 A |
±2 % + 5 digits (50...60 Hz) ±3 % + 5 digits (60...500 Hz) |
|
| AC (top model) | |||
| 600 A | 0.01 A | ±2.5 % + 10 digits | |
| Electrical resistance | |||
| 1000 Ohms | 0.1 Ohm | ± 1 % + 2 digits |
| Continuity check | |
|
Buzzer function <40 Ω |
|
| General characteristics | |
| Screen | Maximum indication LCD 4 digits : 6200 |
| Sampling rate | 3 times/ seconds |
| Power supply | 2 x 1.5V AAA batteries |
| Battery life | 50 hours (without buzzer backlight function) |
| Automatic shutdown | after 30 minutes of inactivity |
| Operating conditions |
0.0 °C ... +40 °C / < 70 % RH 0.0 °F ... +104 °F |
| Storage conditions |
-10 °C ... +60 °C / < 80 % RH +14 °F ... +140 °F |
| Maximum clamp opening | Ø 25 mm / Ø 0.1 in |
| Dimensions |
210mm x 62mm x 36mm 8.26 in x 2.44 in x 1.41 in |
| Weight | 273 g / 0.6 lbs, with batteries |
PCE-DC 41 clamp meter
Voltage measurement up to 600 V / current measurement up to 600 A / CAT III 600 V
Measurement of electrical resistance up to 1000 Ω / measurement of electrical conductors without contact
Voltage measurement up to 600 V / current measurement up to 600 A / CAT III 600 V
Measurement of electrical resistance up to 1000 Ω / measurement of electrical conductors without contact
The PCE-DC 41 clamp meter can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To take a measurement, you can either use the measurement cables, which are included in the package, or use the built-in clamp mechanism. Using the clamp, the user has the ability to measure the amperage, voltage, resistance and continuity of the current of an electrical conductor without contact and without disconnecting the conductor. Measurement data is displayed on the meter's 4-digit backlit display. The meter also features DATA HOLD and PEAK HOLD functions as well as automatic power-off functions, which extend battery life.
Due to its compact design and light weight, the device is suitable for portable use.
- Voltage: 600 V AC/DC
- Current: 600 A AC/DC
- Electrical resistance: 1000 Ω
- Clamp mechanism
- Continuity check
- Current: 600 A AC/DC
- Electrical resistance: 1000 Ω
- Clamp mechanism
- Continuity check
- Peaking and data retention mode
- Measuring cables are included in the package
- 4 digit display
- Screen backlight
- Auto power off
- Measuring cables are included in the package
- 4 digit display
- Screen backlight
- Auto power off
Package contents
1 x PCE-DC 41
1 x PCE-DC 41
1 x Test Leads
1 x Batteries
1 x Carrying case
1 x Instruction Manual
1 x Batteries
1 x Carrying case
1 x Instruction Manual
