Gas Detector - for flammable fuel gases
PCE-GA 12
| Measurement range | At low concentration 0 ... 1000 ppm |
| (methane only) | In high concentration 0 ... 10000 ppm |
| Audible alarm | Loudness: 85 dB |
| Sensitivity | < 10 ppm (with methane) |
| Measurement interval | < 2 seconds |
| Screen | Illustration of measuring combustible gases |
| on LC display, bar graph | |
| Calibration | Automatic |
| Heating | 40 seconds |
| Battery | Li-ion Polymer 18500 3.7V battery |
| Current transformer | Main side: 100 ... 240 V, 50/60 Hz, 0.2 A |
| Secondary side: 5V, 1A | |
| Automatic shutdown | Turns off if the battery capacity is too low |
| alone or after 10 minutes if not used | |
| Sensor resistance | About 5 years (replaceable) |
| Sensor | Semi-rigid 400 mm / 16" |
| Weight | ~430 g / < 1 lb |
Gas leak detector PCE-GA 12/
Flammable gas detector / Rechargeable battery / Audible alarm / Semi-rigid sensor 400 mm / Sensor lifetime approx. 5 years / Vibration alarm / Measurement display up to 10000 ppm / Battery and mains powered (AC power supply)
Flammable gas detector / Rechargeable battery / Audible alarm / Semi-rigid sensor 400 mm / Sensor lifetime approx. 5 years / Vibration alarm / Measurement display up to 10000 ppm / Battery and mains powered (AC power supply)
The PCE-GA 12 gas leak detector is a very easy-to-use measuring device that detects flammable gases and emits an audible alarm as well as a vibrating alarm depending on the concentration of the gas it detects. Thanks to the semi-rigid tube, the sensor can reach quite hard-to-reach places in order to detect a leak.
The device is calibrated automatically, so the user does not need to further adjust the meter.
- 85 dB sound alarm
- Rechargable battery
- Automatic calibration
- Measuring range up to 10000 ppm
- Flammable gas detection
- Durability of the sensor about 5 years
- Vibration alarm when detecting gases
- Replaceable sensor
Package contents
1 x PCE-GA 12 Gas Leak Detector
1 x Charger
1 x User Manual
1 x Charger
1 x User Manual
