PCE-428-EKIT - Class II Ambient Sound Level Meter - USB - Octave Band Mode
| Κωδικός | Τιμή ** | Στοκ | |
|---|---|---|---|
| PCE-428-EKIT | €4.401,00 | Με παραγγελία |
|
Measurement range |
25 ... 136 dbA |
|
Accuracy |
Class 2 |
|
Frequency range |
20 Hz ... 12.5 kHz |
|
Standards |
GB/T3785.1-2010 |
|
Frequency analysis |
Octave bandpass filter: 20 Hz ... 8 kHz |
|
Microphone |
Class 2 1/2" measurement microphone |
|
Data logging interval |
1 s ... 24 h (adjustable) |
|
Measurement functions |
LXY(SPL), LXeq, LXYSD, LXSEL, LXE, LXYmax, LXYmin, LXPeak, LXN. |
|
X = Frequency weighting: A, B, C, Z; |
|
|
24 hour measurement |
Automatic measurement with data storage |
|
Frequency weightings |
A, B, C, Z |
|
Time weights |
Fast- FAST (F), Slow-SLOW (S), Pulse- PULSE (I), Peak- PEAK |
|
Existing noise |
Microphone: 20 db(A), 26 db(C), 31 db(Z) |
|
AD converter |
24 bits |
|
Sampling rate |
Typical: 48 kHz |
|
Measurement illustration |
Arithmetic |
|
Screen |
Illuminated LCD 160 x 160 pixels |
|
Memory |
4 GB Micro SD card |
|
Outputs |
USB |
|
Voltage output |
AC 5V RMS |
|
Alarm |
Adjustable |
|
Power supply |
4 x 1.5V AA batteries |
|
Run time Battery mode |
minimum 10 h |
|
Dimensions |
70 x 300 x 36mm / 2.76 x 11.81 x 1.42" (W x H x D) |
|
Weight |
~ 620 g / 1.4 lbs (with batteries) |
| Carrying Case | PELI 1510 with foam mesh rolls |
| Sealing class | IP65(Waterproof) |
| Sound meter kit | |
| Connections in the suitcase |
Microphone: TNC 12 V Charging voltage: XLR 110 V / 230 V Charging voltage: PowerCon TRU |
| Charger | Victron Blue Smart 12 V / 4 A IP65 (Waterproof) |
| Internal batteries | 2 x 12 V / 12 Ah lead gel |
| Battery operating time | minimum 10 days |
| Power supply |
with charger EU version: 180 ... 265 V AC with charger US version: 100 ... 130 V AC Battery operation: 2 x 12 V / 12 Ah |
| Cable length |
Microphone cable: 2 m / 6 ft 6" with jack TNC Power supply: 2 m / 6 ft 6" with PowerCon TRU |
| Dimensions | 56 x 35 x 23 cm / 2.2 x 1.3 x 0.9" |
| Weight |
~14 kg / 30 lb 13 oz with batteries ~ 8 kg / 17 lb 10 oz without batteries |
PCE-428-EKIT Class II Sound Level Meter with Octave Filter (Optional 1/3 Octave Filter) for Frequency Analysis / ICCP 40mV/PA Microphone / Data Logger / A, B, C, Z Weighting / Fast, Slow, Impulse Analysis and peak resolution/ MicroSD / USB cable/ 3 measurement profiles/ ISO calibration certificate
The PCE-428-EKIT sound level meter provides highly accurate detailed measurements with A, B, C and Z frequency weighting as well as the four sound measurement speeds Fast, Slow, Pulse and Peak.
In addition, the meter can save measurements to 3 different user profiles. Here the user can decide which parameters the sound level meter should record in each profile. For example, you can choose between L aeq , L cPeak , L aFmax , L aFMin and so on.
A parameter that is innovative for the PCE-428-EKIT is the Peak function that ensures the recording of the maximum sound pressure level during a long-term measurement. A 24bit AD converter helps reduce inherent noise to a very low level. The signal sampling rate of 48 kHz enables high measurement accuracy.
PCE-4xx-EKIT
An additional PCE-4xx-EKIT external sound measurement kit can be combined with the PCE-428, 430 or PCE-432 sound meters. This kit makes it possible to measure external noise with a sound meter over a long period of time. The environmental noise monitoring system consists of a waterproof Peli carrying case with rollers. A charger and two additional lead gel batteries are fitted in this case, which allow the sound display to operate for up to 10 days. During external sound measurement, the case can remain closed. Due to the external connections for the microphone and power supply, all electronic components are protected from water.
The insulation of the screen provides protection from wind and rain, and the wind shield of the microphone insulates the measurement from the effect of wind. The PCE-4xx-EKIT kit charger is waterproof and can be left outdoors. A tripod is also available with which the microphone can be placed outdoors.
The PCE-4xx–EKIT can be used to measure noise in critical areas such as road surfaces in residential areas, airports, train stations as well as to measure sound events.
- 1/1 octave (optionally 1/3 octave)
- Category Class 2
- A, B, C & Z frequency weighting
- Fast, slow, pulse and maximum measurement speed (FAST, SLOW, PULSE, PEAK)
- Statistical function
- Display the audio profile as a graph
- 3 adjustable measurement profiles
- Low effect of inherent noises
- Microphone ICCP 40 mV / PA
- Adjustable alarm level
Package contents
1 x external sound level meter PCE-428-EKIT (external sound level meter kit included)
1 x 1/2" class II measurement microphone
1 x Microphone Windshield
1 x USB cable
1 x Software
1 x Power Supply
1 x Carrying case
1 x User Manual
1 x ISO Calibration Certificate
1 x External meter kit PCE-4xx-EKIT
1 x PELI Waterproof Carrying Case
1 x Wind and rain cover for PCE-4xx series microphone
1 x Charger for internal batteries
2 x 12V batteries
1 x tripod
1 x 2 m / 6ft Microphone cable
1 x Connection cable for 110 V / 230 V power supply (optional Schuko or USB connection)
Note: The PCE-428-EKIT ambient sound level meter comes with an octave bandpass filter. Optional upgrade with 1/3 octave bandpass filter (see option)
