Caliper Coating - Painting Ferous and NonFerous 1250 μm
PCE-CT 26FN
| Measuring range | 0 ... 1250 μm (0 ... 49.2 mils) |
| Reading | 1 μm (0.039 mils) |
| Accuracy | ± (2 μm + 3%L) or ± (0.079 mils + 3%L), where L is the measured thickness |
| Minimum measuring surface | 5 x 5 mm / 0.2 in x 0.2 in |
| Minimum radius of curvature | Convex 3 mm (0.1 in) / concave: 50 mm (2 in) |
| Minimum material thickness | Fe: at least 0.5 mm / 0.02 in |
| NFe: at least 0.3 mm / 0.01 in | |
| Display | OLED |
| Ambient temperature | 0 ... 50°C / 32 ... 120°F |
| Power supply | 2 x AAA 1.5V battery |
| Dimension | 100 x 52 x 29 mm / 4 x 2 x 1.1 in |
| Weight | Approximately 68 g / < 1 lb (without batteries) |
Caliper coating PCE-CT 26FN /
For ferrous and non-ferrous substrates / Large measuring surface / Rotatable color display / Lightweight
For ferrous and non-ferrous substrates / Large measuring surface / Rotatable color display / Lightweight
The PCE-CT 26FN is a coating Caliper that performs non-destructive measurement to check the quality of the coating on ferrous and non-ferrous surfaces and ensures fast, high-precision measurements.
The PCE-CT 26FN automotive tester is designed for measurements on non-magnetic coatings such as lacquer, plastic, chrome, copper, zinc, enamel, etc. on steel and iron, as well as on all insulating coatings such as lacquer, plastic, enamel, paper, glass, rubber, etc. on copper, aluminum, brass, stainless steel, and aluminum.
You can easily measure layers of varnish and paint, plastic layers, chrome layers, copper plating, zinc layers, galvanizing, enamel on steel, stainless steel, iron and similar materials, non-ferrous metals (copper, aluminum, brass) and anodized aluminum. Additionally, the user can easily calibrate the Caliper with the help of the calibration standards included in the package.
- Ready to measure immediately
- Wear-resistant sensor
- V groove for measuring pipes
- One-handed operation
- Optional ISO calibration
- Included. carrying case
Package contents
1 x Coating Caliper PCE-CT 26FN
2 x AAA 1.5V batteries
1 x Calibration film set (5 pieces)
1 x Fe standard block
1 x NFe standard block
1 x Carrying case
1 x User manual
2 x AAA 1.5V batteries
1 x Calibration film set (5 pieces)
1 x Fe standard block
1 x NFe standard block
1 x Carrying case
1 x User manual
