PCE-PDA A100L - Digital Manometer
| Κωδικός | Τιμή ** | Στοκ | |
|---|---|---|---|
| PCE-PDA A100L | €885,00 | 2-5 εργάσιμες |
| Pressure measurement range | 0 ... 200 kPa, absolute |
| Reading | 0.01 kPa, 0.1 kPa |
| Accuracy | <± 0.5% of measuring range |
| Nominal pressure | 200 kPa |
| Overpressure | 200 kPa |
| Burst pressure | 300 kPa |
| Means of measurement |
Liquid Air Non-flammable gases |
| Rate of measurement | 10 Hz |
| Units of measurement | Pa, hPa, kPa, MPa, mbar, bar, ATM, kg / cm², mmH2O, cmH2O, inH2O, mmHg, inHg, Torr, PSI, PSF |
| Parameter | Absolute pressure |
| Pressure connections | 5 mm nipple for quick connections |
| Mode | Max, Min and Hold |
| Data logger |
1024 memory slots 1 s ... 255 h Write time per memory location 1 s ... 24 hours recording interval |
| Calibration to zero | Yes, with zero key |
| Average | Yes, between 0.1 ... 9.9 s |
| Screen | Backlit LCD |
| Sealing class | IP41 |
| Power supply |
2 x 1.5V AA battery / 1.2V NiMh battery 5V / 500-mA USB power supply |
| Consumption |
50-mA (backlit) 10-mA (no backlight) |
| Operating temperature | 0 ... 50°C / 32 ... 122 °F |
| Storage temperature | 10 ... 55°C / 50 ... 131 °F |
| Dimensions | 145 x 85 x 35mm / 5.7 x 3.3 x 1.4in |
| Weight | About 285g / < 1lb |
PCE-PDA A100L Manometer
for barometric absolute pressure measurement up to 200 kPa / Data logger / LCD screen / USB output / MAX MIN HOLD functions
The manometer PCE-PDA A100L is suitable for measuring atmospheric pressure from a built-in sensor with a measurement range of 0-200 kPa. The manometer can be used in many applications in industry. It can work with either simple batteries or rechargeable batteries, which can be charged via the USB cable included in the package. The PCE-PDA A100L is equipped with a large backlit LCD screen that makes it easy to read measurements even in adverse conditions.
A plug nipple is available from the pressure connection. In these, air and fluid pressure can be transferred via quick couplings to the sensor. The manometer has a function that allows ten times the accuracy of the measured value. In addition to the continuous pressure measurement, the display shows the maximum and minimum measured values as well as the temperature directly on the screen. To store the measured values for further documentation purposes, the manometer has a data logger, where the user can specify a storage interval and a recording period during which the pressure values are stored. With the push of a button, this save can be brought back to the screen.
- LCD screen
- USB output
- Data logger
- Absolute pressure measurement
- Different units of measurement
- MAX MIN HOLD functions
- Measured value smoothing
- Built-in temperature measurement
2 x 1.2V AA NiMh batteries
1 x USB Adapter
1 x Micro USB Cable
1 x User Manual
