CODETNMG1604**-UC
CODETNMG1604**-UC
TNMG1604**-UC Turning Inserts for Cast Iron - Finishing
ISO Material Suitability
● Optimal suitability · ○ Limited
- (K) - Cast Irons - Grey Cast Iron (Cast Iron)
Availability & price
2 codes
10% off when you buy a full box (10 pcs of the same code) — ships sealed
Express from Europe for codes marked : at our premises in 1-2 working days · from €35 + VAT Express from Europe, from €35 + VAT
| Code | Cutting Depth (mm) | Radius (mm) | Grade | Availability | excl. VAT | incl. VAT | Cart |
|---|---|---|---|---|---|---|---|
| TNMG160404-UC-YG1010 | 0.5~4.0 | 0.4 | YG1010 |
€6,50
|
€8,06
|
||
| TNMG160408-UC-YG1010 | 1.0~4.0 | 0.8 | YG1010 |
€6,50
|
€8,06
|
Machining Materials
- (K) - Cast Irons - Grey Cast Iron (Cast Iron)
Chipbreaker
- (UC) - Geometry for general machining and finishing on cast iron. It features a small rake angle (rake angle) and a reinforced cutting edge with a flat section on the edge (T-land). Suitable for soft cast irons. Ensures very good surface quality.
Grade
- YG1010 – Ideal choice for cast iron (K05–K15). CVD TiCN–Al₂O₃ coating with special post-treatment for increased coating chipping resistance.
Feed
- Fn = 0.20~0.40 mm/rev
Cutting Speed
- (K15-16) - Vc=300~450 m/min
- (K17-18) - Vc=120~350 m/min
Turning inserts from YG1, a top cutting tool manufacturer from Korea. The choice of the appropriate insert depends on the chipbreaker, that is the geometry that helps in breaking and removing the chip, as well as on the grade, which describes the microstructure and coating of the insert and directly affects hardness and toughness. The cutting conditions (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.
Complementary products
Frequently bought together
Sale
Lathe Handle for 60° Triangle Insert TN-- (General Purpose & Roughing)
Lathe Handle for 60° Triangle Insert TN-- (General Purpose & Roughing)
Official distributor
Yg
Inserts TN--16
You're viewing one product from this category. Browse the full range.